Universal Pilot / Cruiser Boat Covers

• Design to fit Pilot and Cruiser type boats.
• Ideal for winter or long-term storage.
• The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
• Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
• Double air vents provide air circulation.
• 6mm braided rope encased in hem and rope ratchet for easy gathering and tightening up the cover.
• A large storage supplied when cover not in use.
• A full set of Rope Ends, Rope Cleats and Tie-down Rope.

1. Measure Boat Length
Measure in a straight line the centreline distance of your boat from Bow to Stern.

2. Measure Beam Width
Measure in a straight line the distance across the beam (widest point of your boat)

3. Measure Height (from gunwale)
Measure a straight line from the gunwale to the highest point on your boat including boat fittings e.g.cabins, windscreens etc.

NOTE:  It is recommended that both measurement instructions are used to help you choose the correct cover size.

OVERALL FABRIC MEASUREMENTS

1. Measure Fabric Width
Using the ‘overall cover fabric width‘ measurement of your chosen cover, measure across the widest point of your boat, over the top of any boat fittings
e.g. cabin, windscreens, etc. to the point on the hull where the cover’s hem will finish.

1. Measure Fabric Length
Using the ‘overall cover fabric length ‘ measurement of your chosen cover, measure along the length of your boat, over the top of any boat fittings e.g. cabin, windscreens, etc. to the point on the hull where the cover’s hem will finish

Overall Cover Dimensions

W FABRIC WIDTH

L FABRIC LENGTH