Side Console Boat Covers

• Design to fit Side Console type boats
• Ideal for trailering and long-term storage.
• Fits boats with bow rails up to 150mm height and console (from Gunwale) up to 700mm in height.
• The cover is constructed of the highest quality 280gsm Atlas marine fabrics.
• Flat double lock seam stitching and highest quality UV threads ensure an extended life expectancy.
• 6mm breaded rope encased in hem, rope ratchet for easy gathering and tighten down the cover.
• Air vent provide air circulation.
• Storage bag when not in used
• A full set of Rope Ends, Rope Cleats and Tie-down Rope.

1. Measure Boat Length
Measure in a straight line the centreline distance of your boat from Bow to Stern.

2. Measure Beam Width
Measure in a straight line the distance across the beam (widest point of your boat)

3. Measure Height (from gunwale)
Measure a straight line from the gunwale to the highest point on your boat including boat fittings e.g.cabins, windscreens etc.

NOTE:  It is recommended that both measurement instructions are used to help you choose the correct cover size.

OVERALL FABRIC MEASUREMENTS

1. Measure Fabric Width
Using the ‘overall cover fabric width‘ measurement of your chosen cover, measure across the widest point of your boat, over the top of any boat fittings
e.g. cabin, windscreens etc.to the point on the hull where the cover’s hem will finish.

1. Measure Fabric Length
Using the ‘overall cover fabric length ‘ measurement of your chosen cover, measure along the length of your boat, over the top of any boat fittings e.g. cabin, windscreens etc. to the point on the hull where the cover’s hem will finish

Overall Cover Dimensions

W FABRIC WIDTH

L FABRIC LENGTH